It is a good idea to begin the design of the foundations of a building at the same time as architectural design work commences. Subsurface conditions beneath a site can strongly influence fundamental decisions about a building—its location on the site, its size and shape, its weight, and the required Read more…
Where building substructures enclose basements, parking garages, or other usable space, groundwater must be kept out. Concrete alone is rarely adequate for this purpose. Moisture can migrate through its microscopic pores, or through other pathways created by shrinkage cracks, form tie holes, utility penetrations, and the joints between concrete pours. Read more…
It is convenient to think of a building as consisting of three major parts: the superstructure, which is the above-ground portion of the building; the substructure, which is the habitable below-ground portion; and the foundations, which are the components of the building that transfer its loads into the soil (Figure Read more…
At least some excavation is required for every building. Organic topsoil is subject to decomposition and to shrinking and swelling with changes in moisture content. It is excellent for growing lawns and landscape plants but unsuitable for supporting buildings. Often, it is scraped away from the building area and stockpiled Read more…
For the purposes of foundation design, earth materials are classified according to particle size, the presence of organic content, and, in the case of finer grained soils, sensitivity to moisture content: Properties of Soils The ability of a coarse-grained soil (gravel or sand) to support the weight of a building Read more…
The function of a foundation is to transfer the structural loads reliably from a building into the ground. Every building needs a foundation of some kind: A backyard toolshed will not be damaged by slight shifting of its foundation and may need only wooden skids to spread its load across Read more…
Testing of Hardened Concrete Many tests are used to evaluate the hardened concrete properties, either in the laboratory or in the field. Some of these tests are destructive, while others are nondestructive. Tests can be performed for different purposes; however, they are mostly conducted to control the quality of the Read more…
Properties of Hardened Concrete It is important for the engineer to understand the basic properties of hardened portland cement concrete and to be able to evaluate these properties. The main properties of hardened concrete that are of interest to civil and construction engineers include the early volume change, creep, permeability, Read more…
Curing is the process of maintaining satisfactory moisture content and temperature in the concrete for a definite period of time. Hydration of cement is a long-term process and requires water and proper temperature. Therefore, curing allows continued hydration and, consequently, continued gains in concrete strength. In fact, once curing stops, Read more…
Mechanical Testing of Steel Many tests are available to evaluate the mechanical properties of steel. This section summarizes some laboratory tests commonly used to determine properties required in product specifications. Test specimens can take several shapes, such as bar, tube, wire, flat section, and notched bar, depending on the test Read more…